Four people pile into a car for a road trip, and by the time they’re back, nobody quite remembers who paid for gas and who didn’t. A trip fuel calculator settles that before the drive even starts. Enter your distance, your car’s fuel economy, and today’s fuel price, and it hands you the total cost and an exact per-passenger split in seconds.
Quick Answer: Fuel cost equals distance divided by MPG, multiplied by fuel price. A 300-mile trip at 28 MPG and $3.95 a gallon costs $42.32, or $10.58 each for four people.
Supported Units: MPG, L/100km, km/L.
Supported Currencies: USD, CAD, AUD, GBP, EUR.
Your Results: Total Fuel Cost, Cost Per Passenger, Fuel Used.
| Trip Distance | Gallons Needed (28 MPG) | Estimated Cost* |
| 200 miles | 7.1 gallons | $24.85 |
| 500 miles | 17.9 gallons | $62.65 |
| 1000 miles | 35.7 gallons | $124.95 |
| 2000 miles | 71.4 gallons | $249.90 |
Example assumes $3.50 per gallon for illustration only. Use the calculator above with your own MPG and local gas price for an exact figure.
Trip Fuel Formula Explained
The trip fuel formula divides your total distance by your MPG to find gallons needed, then multiplies by gas price. Trip fuel cost equals distance divided by MPG times gas price per gallon. The same formula works for any distance, from a 50-mile day trip to a 3,000-mile cross-country drive.
The Basic Formula
allons Needed = Trip Distance in Miles / MPG Total Trip Cost = Gallons Needed x Gas Price Per Gallon Cost Per Person = Total Trip Cost / Number of Passengers If your trip uses kilometers and litres instead of miles and gallons, use Our fuel unit converter switches formats before running the numbers above.
Worked Example for a Real Road Trip
A family drives from Dallas to Orlando, a distance of 1,070 miles, in an SUV averaging 24 MPG. Gas price along the route averages $3.45 per gallon for this example.
Gallons Needed = 1,070 / 24 = 44.6 gallons Total Trip Cost = 44.6 x $3.45 = $153.87 Cost Per Person (4 people) = $153.87 / 4 = $38.47 each If the same family drove a minivan averaging 22 MPG instead, the same trip would cost $167.86, about $14 more for the same distance. Small MPG differences add up fast on long trips.
Calculate Fuel Stops Using Tank Size
Divide your tank capacity by your MPG to find your driving range per tank.
A 15-gallon tank at 28 MPG gives you a range of 15 x 28 = 420 miles.
You need to refuel. On a 1,000-mile trip with that same setup: 1,000 miles / 420-mile range = 2.38, rounded up to 3 fuel stops. Most drivers stop sooner than their absolute range to avoid running close to empty, so plan for a stop every 300 to 350 miles as a safety buffer rather than waiting for the tank to hit empty. A smaller 12-gallon tank at the same 28 MPG only gives a 336-mile range, which means more frequent stops on the same 1,000-mile trip.
Fuel Needed for Common Road Trip Distances
Fuel needed scales directly with distance at a fixed MPG and gas price. A 500 mile trip at 28 MPG and an example gas price of $3.50 per gallon needs roughly 17.9 gallons, costing around $62.65. Use the table above as a quick reference, then calculate your exact figure with your own MPG and local gas price.
Short Trips Under 300 Miles
A 200-mile trip at 28 MPG requires about 7.1 gallons, costing roughly $24.85 at an example price of $3.50 per gallon. Most vehicles complete this distance on a single tank, so fuel stops are optional rather than necessary.
Medium Trips 300 to 800 Miles
A 500-mile trip needs about 17.9 gallons, costing around $62.65 at the same example price. Expect at least one fuel stop for most vehicles with a 12- to 16-gallon tank. This range covers most weekend getaways and regional family visits. For trips you take regularly, our monthly fuel cost calculator tracks the recurring total.
Long Trips Over 800 Miles
A 1,000-mile trip needs roughly 35.7 gallons, costing around $124.95. A 2,000-mile cross-country drive doubles that to about $249.90. Long trips benefit most from planning fuel stops in advance, since prices can vary by $0.50 or more per gallon between states.
Fuel Cost as Part of Your Road Trip Budget
Fuel usually represents 25 to 40 percent of total road trip expenses for a typical multi-day trip. Accommodation, food, tolls, and parking make up the rest, and often add up to more than the fuel itself on longer trips. A family spending $150 on fuel for a 1,000 mile trip might also budget $300 to $500 for two nights of hotels, $150 to $250 for meals, and $20 to $40 for tolls depending on the route. Knowing your fuel cost first gives you the anchor number to build the rest of your road trip budget around, since it is usually the most predictable expense once you know your distance and MPG.
What Affects Your Trip Fuel Cost
Four factors shape your total trip fuel cost. Your vehicle’s MPG matters most over the full distance. Fuel stop timing, driving conditions, and vehicle load all influence the final number, sometimes by 10 percent or more across a long trip.
Vehicle MPG
A vehicle averaging 35 MPG costs roughly 20 percent less in fuel than one averaging 28 MPG over the same distance. Use our cost per mile calculator to compare vehicles before deciding which one to take on a long trip.
Number of Fuel Stops
Each fuel stop is an opportunity to find a cheaper price or get stuck with an expensive one. Highway exit stations near interstates often charge $0.20 to $0.40 more per gallon than stations a few miles into town. Planning ahead with a gas price app saves real money over a multi-stop trip.
Highway vs Mixed Driving
Steady highway driving at 60 to 65 mph typically gives better MPG than stop-and-go city driving. A vehicle rated at 28 MPG combined might achieve 32 to 34 MPG on a pure highway road trip. Our fuel consumption calculator helps you find your real highway MPG from your own trip data.
Cargo and Passenger Weight
A fully loaded vehicle with luggage and passengers can reduce MPG by 5 to 10 percent compared to driving empty. A roof box or cargo carrier adds aerodynamic drag and can reduce highway MPG by another 5 to 15 percent depending on size and speed.
How to Spend Less on Fuel During a Road Trip
Holding a steady 60 to 65 mph on the highway is the single biggest saving on a long drive, because fuel use climbs quickly once you push past 70. Check tire pressure before you leave and pack light, since a loaded roof box or an overstuffed trunk can take several MPG off the whole trip. Fill up in cheaper areas instead of at highway exits, where the same gallon often costs 20 to 40 cents more, and use cruise control on flat stretches to keep your speed even. Plan the route to avoid rush-hour traffic in big cities, because an hour of stop-and-go burns more fuel than many miles of open road.
Related Calculators
The Fuel Consumption Calculator covers the full picture, cost, comparisons, and monthly planning. The Fuel Cost Calculator handles a single trip without the passenger split. The Monthly Fuel Cost Calculator turns a regular commute into a recurring budget. The MPG Calculator helps you find your real-world fuel economy before relying on it here. The Fuel Unit Converter, km/L Calculator, and L/100km Calculator cover metric conversions directly, and the Cost Per Mile Calculator adds insurance, maintenance, and depreciation for the full running cost.
Frequently Asked Questions
Methodology
Trip fuel cost on this page uses the standard formula: fuel needed equals trip distance divided by your MPG, and total cost equals fuel needed multiplied by the price per gallon. Cost per passenger divides that total by the number of people sharing the car, and a round trip simply doubles the distance. The result assumes you hold a steady average MPG for the whole drive, so speed, load, terrain, and weather can move your real number up or down. Reviewed by the FuelConsumptionCalc Editorial Team. Last updated September 2026.
